Adjusting the pedals
Last edited: 26. September 2022|Publishing date:1. July 2020|Setup
With this option you can determine the switching point of the pedal, i.e. you determine the position of the mechanical pedal at which the digitally generated output reacts.
The two graphics are interdependent: the value Pedal Up Trigger (bottom) cannot be higher than the trigger point above, just like in the acoustic model.
The lower the value (in %), the “higher” (in the sense of a higher position) is the corresponding switching point.
The adjustment of the switching points is recommended after each calibration of the pedals.
With this option you can determine the switching point of the pedal, i.e. you determine the position of the mechanical pedal at which the digitally generated output reacts.
The two graphics are interdependent: the value Pedal Up Trigger (bottom) cannot be higher than the trigger point above, just like in the acoustic model.
The lower the value (in %), the “higher” (in the sense of a higher position) is the corresponding switching point.
The adjustment of the switching points is recommended after each calibration of the pedals.